How to wire the vacuum electrode and vacuum connector?

    Vacuum electrode and vacuum connector are essentially a kind of connector, but different from other ordinary connectors, they are given the function of vacuum sealing.

    At present, the common varieties of vacuum electrodes and vacuum connectors on the market have technical parameters that focus on the vacuum sealing performance, while ignoring the inconvenience of the connector when it is used. How to connect and insulate quickly and maintain a stable contact is an obvious shortcoming. Many customers and friends bought a vacuum electrode and found that they could not start the wiring. In addition, after discovering that the sealing surface leaked, it was difficult to replace the sealing gasket.

    From the perspective of connecting wires, whether it is welding, crimping, screw fastening, and insulation treatment, a certain amount of operating space is required, which requires that the distance between the connecting pins be large enough. However, the too large distance between the needles causes the size of the vacuum electrode flange to be too large, which in turn increases the processing cost and the risk of leakage at the seal.

    Huipu Technology has fully considered this need and developed a convenient wiring operation without sacrificing pin density and insulation characteristics. In a vacuum electrode flange with a certain space, the electrode needles are very compact, but each needle can be assembled separately and insulated from each other. We give vacuum connectors and vacuum electrodes the most user-friendly features. The vacuum connectors and vacuum electrodes developed and produced by Huipu Technology separate the wiring process from the flange assembly process, which is more suitable for the mass production of related vacuum equipment.

    (Huiputech